Optional Accessories - Makita SD100D Betriebsanleitung

The V-notch and
in the base
the tool indicate
of the blade.
the blade position when cutting.
The base cover of the tool
►
Fig.17: 1. V-notch 2. Convexed portion 3.
Blade
NOTE: For accurate cutting, it is recommended to
draw cutting lines on the workpiece beforehand.
1. Place the
the blade
start line.
tool so that the front edge of the base
touches the workpiece.
bottom of
in the
with the cutting line. ► Fig.18
2. Slowly pull the trigger without the blade
making any contact with the workpiece. When the blade
attains full speed, push
toward the
the blade pierces the workpiece,
make the whole surface of the base cover contact with
the workpiece. ►
Fig.19
3. Move the tool straight forward until the
cutting finishes.
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
Cleaning the base cover
Clean off the cutting chips and dust accumulated on the
base cover. Lift the base cover while pulling the hook on
the back end to remove. Follow the removal procedure
in reverse when installing.
►
Fig.20: 1. Base cover 2. Hook
CAUTION:
Pay attention to the tip of the blade
and cutting chips when removing the base cover.
NOTICE:
Perform the
periodically.
cover may damage or deface the working surface.
To maintain product
RELIABILITY, repairs,
maintenance or
convexed portion
cover of
the position
Always check
tip of
on the
Tilt the
Align the
the V-notch
front edge
the tool
workpiece. As
cleaning
Dirty base
SAFETY and
any other
adjustment should
12 ENGLISH
be performed by
Authorized or
always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual.
of
accessories or attachments might present
a risk of injury
use
attachment for its stated purpose.
If you
assistance for
regarding these accessories, ask your local Makita
Service Center.
•
Drywall
•
Wood saw
•
Dust box
•
Dust collector
•
Hex wrench
•
Hook
•
Makita
charger
NOTE: Some items in the list may be included in the
tool package
accessories.
differ from country to country.
Makita
Factory Service Centers,
The
any other
to persons.
accessory or
need any
more details
saw blade
blade
genuine battery and
as standard
They may
use
Only