Operation Instructions - COMFORTPOOL Inverter Pro Benutzer- Und Wartungshandbuch

3. Operation instructions

Symbol
Operation
1. You may set the desired water temperature from 18 to 40 °C.
2. The on the right shows the inlet water temperature. The
temperature by pressing
3. After you turn on the heat pump, the fan will start to run in 3 minutes. In another 30 seconds, the
compressor will start to run.
4. During heating, the
Mode selections
1. The light will be on, as standard when you turn on the heat pump.
2. Press to enter the Silence mode, the
3. Press again to exit and enter the Smart mode.
Designation
Power ON / OFF Press to power on or off the heat pump
Mode Press to select Smart / Silence mode
Up / Down Press to set desired water temperature
or .
light will be on. During cooling, the
Function
on the left shows the set
light will be on.
light will turn on.
32