COMFORTPOOL Inverter Pro Benutzer- Und Wartungshandbuch Seite 25

Set the proper temperature in order to get a comfortable water temperature, and avoid
overheating or overcooling.
Do not remove the screen of the fan at any time.
Ensure that the area is well-ventilated when the unit is operated together with a combustion
appliance. Inadequate ventilation may cause oxygen starvation.
After the heat pump is used for several seasons, perform inspection and maintenance in
addition to normal cleaning. Dirt or dust in the unit may create an unpleasant odor, contribute
to growth of fungi, such as mold, or clog the drain passage, and cause water to leak from the
indoor unit. Consult your dealer for inspection and maintenance, which require specialized
knowledge and skills.
Do not operate switches with wet hands. This may cause electric shock.
Do not clean the heat pump with water or place an object that contains water, such as a flower
vase, on it. This may cause fire or electric shock.
Do not step on or place any object on the unit. This may cause injury if you or the object falls
down.
IMPORTANT
Dirty pool filters cause condensation in the heat pump which will contribute to the growth of fungi such as
mold. It is therefore recommended to clean or change the filters every 2 weeks.
In order to optimize the heating effect, please install heat preservation insulation on the pipes between
the pool and the heater. During the running period of the pool heater, please use a recommended cover
on the swimming pool.
Connecting pipes between the swimming pool and the heater should be ≤10m, otherwise the heating
effect of the heat pump cannot be ensured.
The heat pump is most efficient at an air temperature between 15°C and 25°C.
Above warnings and cautions are not intended to incorporate all possible instances for risks and
injuries. Owners and users of the heat pump should always exercise caution and common sense when
utilizing the product.
25