Safety And Precautions - COMFORTPOOL Inverter Pro Benutzer- Und Wartungshandbuch

Thank you for choosing our Comfortpool Inverter Pro heat pump. Please read this instruction
manual carefully before starting the machine, otherwise the machine may be damaged, or cause
you unnecessary harm.

Safety and precautions

Meaning of symbols displayed on heat pump unit
WARNING
Read the OPERATING INSTRUCTIONS carefully before operation.
Service personnel are reguired to carefully read the OPERATING INSTRUCTIONS and
INSTALLATION MANUAL before operation.
Further information is available in the OPERATING INSTRUCTIONS, INSTALLATION MANUAL,
and the like.
* Since rotating parts and parts which could cause an electric shock are used in this product, be sure to
read these "Safety and precautions" before use.
* Since the cautionary items shown here are important for safety, be sure to observe them.
* After reading this manual, keep it together with the installation manual in a handy place for easy
reference.
* Be sure to receive a guarantee card from your dealer and check that the purchased data and shop
name, etc. are entered correctly.
WARNING
Do not connect the power cord to an intermediate point, use an extension cord, or connect
multiple devices to heat pump. This may cause overheating, fire, or electric shock.
Make sure the power plug is free of dirt and insert it securely into the outlet. A dirty plug may
cause fire or electric shock.
Do not bundle, pull, damage, or modify the power cord, and do not apply heat or place
heavy objects on it. This may cause fire or electric shock.
Do not turn the breaker OFF/ON or disconnect/connect the power plug during operation.
This may create sparks, which can cause fire.
Do not expose your body directly to cool air for a prolonged length of time. This could be
detrimental to your health.
The unit should not be installed, relocated, disassembled, altered, or repaired by the user.
An improperly handled heat pump may cause fire, electric shock, injury, or water leakage,
etc. Consult your dealer.
If the power supply cord is damaged, it must be replaced by the manufacturer or its service
agent in order to avoid a hazard.
This unit uses a flammable refrigerant (R32).
If refrigerant leaks and comes in contact with fire or heating part, it will
create harmful gas and there is risk of fire.
22