Standby Mode; Setting The Kitchen Timer; Child Lock; Query Functions - Silvercrest SMW 900 EDS B2 Bedienungsanleitung

2. Select the required mode (Hr 24 or Hr 12) by
turning the rotary knob r
your selection by pressing the Start/quick start
button r
.
Note:
The time display will only appear once you turn the
r again, which enables you to
rotary knob
set the hour.
3. Select the required hour by turning the rotary
knob r
and confirm your selection by
pressing the Start/quick start button r
4. Select the required minutes by turning the rotary
knob r
and confirm your selection by
pressing the Start/quick start button r
The time display is now programmed.
To read the current time while the microwave is in
operation, press the Clock button q
is then shown in the display 1 for a few seconds.

Standby mode

The microwave automatically switches over to stand-
by mode, and the time is displayed, if no button is
pressed for a longer period. The display illumina-
tion also dims a few seconds after switching over
to standby mode.

Setting the kitchen timer

The microwave oven is provided with a kitchen timer
which you can use independently of the microwave
operation.
Press the TIMER button w while the appliance
1.
is in standby mode. "0:00" is shown in the
display 1 along with symbol
2. Now set the required time using the rotary knob
r
. You can select any time range from
10 seconds to 95 minutes.
3.
and then confirm
As soon as the set time period has expired, signal
tones sound.

Child lock

. Engage this setting to prevent accidental activation
by children and other persons not familiar with the
operation of the appliance.
. The symbol for the child lock
display 1 , which means that the appliance cannot
be operated as long as this function is activated.
• Press the Stop/child lock button e
; the time
• To deactivate the child lock, press the Stop/child

Query functions

Query the time during operation
During the cooking process, press the Clock
button q
seconds in the display 1.
Query the power level operation
. During the cooking process, press the Microwave
button 6
appear for a few seconds in the display 1.
- 10 -
Press the Start/quick start button r
The appliance emits an acoustic signal. The
countdown begins. After approx. 3 seconds
the current time is shown once again. The
kitchen timer will continue to run in the back-
ground. If you want to check the kitchen timer
inbetween times, press the TIMER button w.
The kitchen timer appears for a moment.
hold it down until a signal tone is sounded and
the symbol for the child lock
the display 1. The buttons and the control dial
now no longer have a function.
lock button e
a signal tone is sounded and the symbol for the
child lock goes out.
. The time will appear for a few
. The activated power level will
.
appears in the
and
appears in
and hold it down until