Frame Battery - Gazelle Bosch-system Bedienungsanleitung

3.2 Frame battery

1. Check the battery before charging it for
the first time or using it with your e-bike.
Do this by pressing
switch on the battery.
If there are no LEDs lit up on charge
indicator A3, the battery is likely to be
damaged. If at least one LED is lit, but not all
LEDs on charge indicator A3 are lit, you will
need to charge the battery fully before first
use. (Charging temperature: 0 to 40 ⁰C).
When charging the battery you can also
remove it and charge it off the bike. You will
find information on this in the comprehensive
online user manual.
C1
-button A4 to
A6
A5
A3
A6
A5
A4
A3
2. Remove protector C7 from the charging
A1
connection.
3. Connect charger plug C1 to battery C6.
4. Connect the charger mains plug to a
mains socket.
C7 C6
5. Once all the battery LEDs on charge
indicator A3 are lit, the battery is fully
charged. Pull charger plug C1 out of the
charger connection and remove the
charger mains plug from the mains socket.
6. If you have charged the battery off the
bike, you should fit it back under the
A4
luggage carrier.
A7
C7
A2
A8
A9
C6
EN
39