Kiox Display - Gazelle Bosch-system Bedienungsanleitung

3.8 Kiox display

(6)
For activating the electrical system you have
the following possibilities:
• On the installed on-board computer and
installed battery, briefly press the
ton (4) of the on-board computer once.
• On the installed on-board computer press
the button of the battery. This is not
possible with all models.
For de-activating the electrical system you
have the following possibilities:
• Press the button (4) of the on-board
computer briefly.
• On the installed on-board computer press
the button of the battery. This is not
possible with all models.
• Remove the on-board computer from the
holder.
You will find comprehensive information relating the battery, the motor, the centre and side display, the charger, the speed
sensor, range, diagnosing faults, remedying faults, maintenance and technical specifications in the comprehensive manual at
www.gazellebikes.com/en-gb/service/folder-and-manuals. We wish you a great deal of pleasure using your new bike
with the Bosch drive system!
If no power is required of the drive for
approximately 10 minutes (for example
because the e-bike is stationary) and no but-
ton of the on-board computer or control unit
of the e-bike has been pressed in that time,
(1)
then both the electrical system and battery
(2)
de-activate in order to save power.
(3)
(4)
(5)
(17)
A
On the control unit (7) you can set how much
assistance the drive gives you when pedal-
ling. The assistance level can be changed at
all times, even when cycling.
(18)
but- In order to increase the assistance level you
(14)
press the
many times as is necessary
to get to the desired assistance level shown
(16)
on the display. For reducing the assistance,
press the
Bosch eBike Systems
(7)
(12)
(13)
(1)
(15)
2
button (12) on the control unit as
1
(5)
button(11)
EN
| 3
(8)
(9)
(10)
(11)
(19)
1 270 020 XBK | (12.03.2019)
43