Samsung SMT-190Dx Anleitung Seite 67

USER'S MANUAL USER'S MANUAL USER'S MANUAL
Step-by-Step Setup Example of IP Router
D-Link model DI-624+
1. Select "Virtual Server" and "Advanced"
You need to create Virtual Servers (Port Forwarding) for
HTTP, TCP and Upgrade separately.
. Virtual Server (Port Forwarding) for HTTP
 Enabled : Leave this "checked"
 Name : Set this to "HTTP"
 Private IP : SETUP MENU -> 5-9) NETWORK
SETUP -> Check IP from network status to
apply it identically to Private IP after DHCP
setup. (Eng-  Setup)
 That is not in use by any other device
connected to the IP Router including the
Local PC.
 Protocol Type : Select "TCP"
 Private Port and Public Port : Set both to
"From 10 to 6555"
 Schedule : Select "Always"
 Click "Apply"
. Close browser window.
Step-by-Step Setup Example of IP Router
SMC model 7004VBR
1. Select "NAT" and "Virtual Server"
You need to create Virtual Servers (Port Forwarding) for
HTTP
2. Virtual Server (Port Forwarding) for HTTP : use the first
empty ID row.
 IP Address : SETUP MENU ->
5-9) NETWORK SETUP -> Check IP from
network status to apply it identically to Private
IP after DHCP setup. (Eng- Setup)
 That is not in use by any other device
connected to the Router including the Local
PC.
 Private Port and Public Port : Set both to
"From 10 to 6555"
 Data Type : Select "TCP"
 Enable : Leave this "checked"
. Click "APPLY"
. Close browser window.
Eng-67