Rear - Samsung SMT-190Dx Anleitung

USER'S MANUAL USER'S MANUAL

■ Rear

Rear
Caution
Do not connect the Video In (BNC Input) and the RJ-11 (DIY Camera) input with the same channel at the same
time. Do not connect the Audio In(RCA Input) and the RJ-11(DIY Camera) input with the same channel at the
same time. If connecting them simultaneously, two input signals may be mixed when outputting. This is not the
product defect; so, please connect only one between the two inputs.
Symptom:
When 2 video signals are input simultaneously, the pictures overlap on the screen. At this time, noise appears
next to CH when the user enters each of the menus by pressing the MENU or SEARCH key. In this case,
although the noise disappears when the user exits the menu, it reappears when the user reenters the menu.
Countermeasure:
Remove one of the video signal inputs causing the problem and press the M.SCREEN key. Then the noise
that appeared next to CH in the MENU or SEARCH window disappears.
Names
Video Input( RJ11)
CH1 ~ CH8
Video Input(BNC)
CH1 ~ CH8
NETWORK
Video Out
Audio out
VGA In
HOT
COLD
A/R
GND
Audio In
Video Input (BNC)
Video Input (RJ-11)
Connector linked to the Port DIY CAMERA(SOC-C10, SOC-N10).
Composite video signal input connector (BNC Style Connector).
Connector for LAN cable connection.
Video signal output connector (RCA Jack)
Audio signal output connector (RCA Jack)
VGA signal input.
Alarm output connector. Sends alarm signals to external devices.
Connect to the ground terminal of the external devices.
Alarm reset connector. Sends alarm reset signal to external devices.
Connect to the ground terminal of the external devices.
Audio Input signal connector from CH1 to CH.(RCA Jack).
Function
Eng-16
Audio In