Chapter 10 : Monitor Setup Menu; No Signal Display; Osd Menu Selection; Input Menu - Samsung SMT-190Dx Anleitung

USER'S MANUAL USER'S MANUAL USER'S MANUAL
Chapter 10 : Monitor
Setup Menu

No Signal Display

When there is no connection at the VGA input, the On
Screen Display will show this message.
Check signal cable.

OSD Menu Selection

Press DVR/LCD button to select LCD MENU or DVR
MENU by turns. If DVR/LCD LED is green,it means LCD
mode. if it is red, it is DVR mode.
VGA
<VGA mode>
Source List
PIP
Edit Name
Move
Inputs can be set to VGA mode.
1. Press the MENU and ENTER button.
. Press the ENTER or  button and then /
button to select input menu.
. Press the ENTER or button to save the setting
and exit.
PIP ON (VGA mode only)

PIP
Size
Position
Move
If you didn't select VGA input, this menu is not available.
1. Press the MENU and ENTER button.
. Press the / and ENTER button to select the
PIP menu.
. Press the ENTER or  button to see the sub menu.
. Press the / and ENTER button to select On.
5. Press the MENU or  button repeatedly to exit.
Eng-6
A. Input Menu
: DVR
Enter
: Off
:
:
Enter
Input



Exit
PIP



Return