Samsung SMT-190Dx Anleitung Seite 13

USER'S MANUAL USER'S MANUAL
1. Connect LAN cable of Cable/ADSL modem or Direct
Fixed/Static IP LAN Line to WAN port of IP Router.
. Connect LAN ports of IP Router to Ethernet port
SMT-190DN to be set up and to Ethernet port of Local
PC to use during setup.
. Connect Video cable of Camera to MONITOR.
. Turn on the MONITOR power.
Notice
If you have a Static (Fixed) IP line or Dynamic IP line
(Cable Modem or ADSL Modem) with one IP address
(whether its dynamic or fixed), but have more than
one internet device to use (such as a PC and a SMT-
190DN or several SMT-190DN); you must use an IP
Router (different from a simple Network Hub); you
must set up the Router to work with the SMT-190DN;
and you must use a network capable PC within the
local Router network to do the setup. If you are using
an existing Router which is already set up, you may
not need to redo the basic setup of the Router agian,
but it is highly recommended that you at least read
all the instructions below and go through the steps.
Whether you are using an existing Router or a new
Router, you must go through the Port Forwarding
portion of the setup. stable power is supplied.
Eng-1