Safety Notes - Mettler Toledo ICS4-Serie Kurzanleitung

1.3 Safety notes

Devices with protection level IP5x or IP65
Devices with protection level IP5x or IP65 are protected against dust and splashing of water respectively dust-
tight and protected from water jets according to EN 60529. They are suitable for use in dusty environments and
brief contact with liquids.
Ensure that the device is dried off after coming into contact with liquid.
Do not use the device in environments with a risk of corrosion.
Do not flood the device or submerge it in liquid.
Devices with built-in power supply unit
Ensure that the power socket outlet for the device is earthed and easily accessible, so that it can be de-
energized rapidly in emergencies.
Ensure that the supply voltage at the installation site lies within the range of 100 V to 240 V.
Ensure that there is a space of at least 3 cm (1.25") at the rear in order to prevent the power cable from
being bent too strongly.
Check the power cable regularly for damage. If it is damaged, immediately disconnect the device from the
power supply.
Devices with built-in storage battery
Only use storage batteries from the manufacturer.
After the storage battery has been charged, the cover cap of the charging socket must be closed.
Compact scales / Terminal and platform combinations
Avoid falling and shock loads as well as any impact from the side.
The maximum static safe load must never be exceeded. Observe the operation limits, see technical data of
the connected weighing platform.
4 Safety instructions​ ​ ICS4__ / ICS68_