Product Description And Specifications - Bosch GSB 18-2 RE Professional Originalbetriebsanleitung

Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for impact drilling in brick, con-
crete and stone, as well as for drilling in wood, metal,
ceramic and plastic. Tools with electronic control and right/
left rotation are also suitable for screwdriving and thread
cutting.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
a)
(1) Keyless chuck
a)
(2) Front sleeve
a)
Rear sleeve
(3)
Technical data
Impact drill
Article number
Rated power input
Power output
No-load speed
– 1st gear
– 2nd gear
Rated speed
– 1st gear
– 2nd gear
Impact rate
– 1st gear
– 2nd gear
Rated torque
– 1st gear
– 2nd gear
Spindle collar diameter
Speed preselection
Right/left rotation
Keyed chuck
Keyless chuck
Max. drilling diameter (first/second gear)
– Masonry
– Concrete
Bosch Power Tools
(4) "Drilling/impact drilling" selector switch
(5) Rotational direction switch
(6) Lock-on button for on/off switch
(7) On/off switch
(8) Speed preselection thumbwheel
(9) Gear selector switch
(10) Button for depth stop adjustment
(11) Wing bolt for auxiliary handle adjustment
(12) Auxiliary handle (insulated gripping surface)
(13) Depth stop
(14) Handle (insulated gripping surface)
a)
(15) Drill chuck key
(16) Keyed chuck with manual lock
a)
(17) Screwdriver bit
a)
(18) Universal bit holder
a)b)
(19) Hex key
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
b) Commercially available (not included in the scope of deliv-
ery)
GSB 18-2 RE
3 601 AA2 1..
W 800
W 420
-1
min 0 – 1100
-1
min 0 – 3000
-1
min 0 – 740
-1
min 0 – 1930
-1
min 0 – 17600
-1
min 0 – 48000
Nm 4.8
Nm 1.8
mm 43
●
●
●
–
mm 18/14
mm 16/12
English | 13
a)
a)
GSB 18-2 RE
3 601 AA2 2..
800
420
0 – 1100
0 – 3000
0 – 740
0 – 1930
0 – 17600
0 – 48000
4.8
1.8
43
●
●
–
●
18/14
16/12
1 609 92A 7XE | (01.07.2022)