Product Description And Specifications - Bosch GBH 18V-21 Professional Originalbetriebsanleitung

14 | English
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) SDS plus drill chuck
(2) SDS plus tool holder
Dust protection cap
(3)
(4) Locking sleeve
(5) Button for depth stop adjustment
(6) Release button for impact/mode selector
switch
(7) Impact/mode selector switch
(8) Rotational direction switch
On/off switch
(9)
(10) Handle (insulated gripping surface)
a)
(11) Battery
(12) Worklight
(13) Battery release button
(14) Auxiliary handle (insulated gripping surface)
(15) Depth stop
(16) Universal holder with SDS plus shank
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless rotary hammer
Article number
Rated voltage
A)
Rated speed
– Clockwise
– Anticlockwise
A)
Impact rate
1 609 92A 77L | (22.12.2021)
Cordless rotary hammer
Impact energy per stroke ac-
cording to EPTA-Procedure
05:2016
Tool holder
Max. drilling diameter
– Concrete
– Steel
– Wood
Weight according to EPTA-
Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation
during storage
Recommended batteries
Recommended battery char-
gers
A) Measured at 20–25 °C with rechargeable battery ProCORE18V
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Noise/Vibration Information
Noise emission values determined according
to EN IEC 62841-2-6.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 90 dB(A); sound power
level 101 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
a)
Vibration total values a
determined according to EN IEC 62841-2-6:
Hammer drilling into concrete: a
Chiselling: a
a)
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
GBH 18V-21
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
3 611 J11 1..
plication tools or is poorly maintained, the vibration level
V= 18
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
-1
working period.
min 0−1800
To estimate vibration and noise emissions accurately, the
-1
min 0−1800
times when the tool is switched off or when it is running but
-1
min 0−5100
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
mm
mm
mm
B)
C)
and
12.0Ah.
(triax vector sum) and uncertainty K
h
=15.5 m/s
h
2 2
=12.7 m/s , K=1.5 m/s
h
GBH 18V-21
J 2
SDS plus
21
13
30
kg 2.8−3.7
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
2 2
, K=1.5 m/s ,
,
Bosch Power Tools