Cleaning; Safety Instructions For Maintenance; Possible Malfunctions - Bartscher A120880 Bedienungsanleitung

6.2 Cleaning

o Clean the device following each use to avoid scorching of leftovers and drippings.
o Clean the device on the inside and outside with a mild, soft cloth.
o Clean the grid under warm running water with a soft cloth or sponge and mild
cleaning agent. Rinse in clean water and dry thoroughly.
o Clean the baking tray with a paper towel or moist cloth. Pour a thin layer of oil on
the tray to remove stubborn remnants and wait 5-10 min. Before wiping away the
oil with a paper towel.
o Never clean the device using harsh chemicals or abrasive instruments, in order to
avoid damaging the device's paint.
o Only use a soft cloth and make sure you never use any kind of abrasive agents or
pads which could scratch the surface.
o After the cleaning procedure, you should use a soft and dry cloth to wipe dry and
polish the surface.

6.3 Safety instructions for maintenance

o Inspect the power cable regularly for damage. Never use the device if the cable is
damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.

7. Possible Malfunctions

PROBLEM
The device is on but
not heating.
POSSIBLE CAUSES
• Device not connected to
socket.
• Temperature dial not set.
SOLUTION
• Insert plug into an
appropriate socket.
• Set temperature.
- 27 -