Cleaning And Maintenance; Safety Advice; Cleaning; Safety Instructions For Maintenance - Bartscher PRONTO 20 Bedienungsanleitung

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o Wash the device regularly.
o Turn off the unit and allow it to cool.
o Wash the outside of the device with a soft, damp cloth.
o Wash all accessories (the rack, ceramic stone, crumb tray, rack handle, pizza
cutter) with a gentle detergent and rinse under running water. Dry all the items
thoroughly.
o Use soft cloth only and make sure you never use any kind of abrasive agents or
pads, which could scratch the surface.
o After the cleaning procedure you should use a soft and dry cloth to wipe dry and
polish the surface.
o Prior to further use, check to ensure that the device has been thoroughly cleaned
and dried.

6.3 Safety instructions for maintenance

o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
Downloaded from www.Manualslib.com manuals search engine
- 25 -