Configuration - MACHEREY-NAGEL PF-12 Plus Handbuch

11.2 Configuration

To get to the configuration mode enter „900" in the method selection mode
Method:
- Settings
Basic functions
Tube tests
VISOCOLOR-ECO
^_
Zero calibration
^_
instructions on the display. The icons have following meanings and functions:
11.2.1 Language (Method 954)
Select the desired language via
11.2.2 Time (Method 951)
Select the digits via
selection of the time format. Select the desired time format via
to confirm.
11.2.3 Date (Method 950)
Select the digits via
dialog to select the date format. The following format types are available:
23.01.2014
01/23/2014
2014-01-23
Select the desired date format via
11.2.4 Contrast (Method 959)
The contrast of the display can be changed via
store the setting.
11.2.5 Brightness (Method 960)
The brightness of the display can be changed via
store the setting.
11.2.6 Calibration (Method 956)
Press to start the calibration. The instrument asks to make sure there is no cuvette
in the slot. Press to start the calibration with reference to air. Afterwards the PF-12
asks you to insert the calibration tube (clean test tube filled with distilled water). Confirming with
starts the water calibration.
11.2.7 Reaction time (Method 952)
Use /
Manual Photometer PF-12
50
or use /
calling up the settings via method "900", it is also possible to call up
individual settings quickly.
Each setting is assigned a number. Entering this three-digit number
956
as the method in the start menu leads to the corresponding settings
menu.
The configuration menu is based on icons. You can navigate
through the menu via
/ and adjust with the keypad. Confirming with
/ and adjust with the keypad. Confirming with
/
to turn the reaction time on or off and press
Plus
to select the entry „Settings" in the list. In addition to
/ , confirm by pressing
/ and press
and press to confirm.
/
EN, V2.00, 08.2021
and follow the
to confirm.
/ and press
in several steps. Press
/ in several steps. Press
to confirm.
opens the
opens a
to
to
Plus