Performance Of Visocolor Eco Tests - MACHEREY-NAGEL PF-12 Plus Handbuch

12.1 Performance of VISOCOLOR
A clean, dry tube (16 mm OD) is used instead of the VISOCOLOR
second tube (an untreated sample or reagent blank, depending on the test) is used for zero
adjustment.
Switch on the photometer
03.06.2014 09:30
Method
^_ M: 029
Method:
Basic functions
Tube tests
- VISOCOLOR-ECO
Bio tests
^_
03.06.2014 09:30
5081 AMMONIUM 3
^_ äåèò
03.06.2014 09:30
5081 AMMONIUM 3
^_ äåèò
Plus
ECO on the PF-12
can be found on the Internet at www.mn‑net.com and on the enclosed software DVD.
Manual Photometer PF-12
54
ECO tests
®
The display „Method: _ _ _" appears.
A VISOCOLOR
(5-xx)
as well as with the keys
tests.
Performing the zero measurement
Insert the clean tube with the zero value into the photometer and
press the key. Remove the vial with the zero value.
Z
Performing the measurement
Place a clean vial with sample solution in the photometer, press the
key and read off the measured value.
For detailed information on the individual tests, refer to the corre-
Z M
sponding test instruction or the pictogram instructions VISOCOLOR
, which are available separately. These manual pages in pictogram form
Plus
ECO test can be performed using the test number
®
/ via the list of VISOCOLOR
EN, V2.00, 08.2021
ECO measuring glass. A
®
ECO
®
®