Pulse Rate - Zipro Dynamite Bedienungsanleitung

PULSE RATE

ATTENTION! The heart rate is measured for sports purposes only (not for medical use).
• Press MODE until the display shows PULSE.
• Put both your hands on the heart rate sensors on the handlebar. During the measurement, the
computer displays a heart icon.
•
The computer displays the current heart rate after three to four seconds.
RECOVERY
Press RECOVERY and put your hands on the heart rate sensor. CAUTION! The test is possible only if
•
the computer detects a heartbeat.
•
The computer will display TIME 1:00 (1 minute) and start a countdown. Keep your hands on the
heart rate sensor during the countdown.
• After the countdown, the computer will display your result from F1 to F6. Use the table below to
read your result:
F1 Outstanding
F2
Very good
F3
Good
F4
Average
F5 Below average
F6 Concerning
•
Press RECOVERY again to return.
MOBILE APP BLUETOOTH PAIRING
The computer is compatible with iConsole+ Training.
Start your training and enjoy new possibilities:
•
Download the app.
• Enable Bluetooth on your mobile device.
•
Start the app and select the ZIPRO device you want to pair.
•
When ZIPRO is connected with the app, the computer is turned off and the screen goes blank. From
now on, you control ZIPRO through your mobile device.
iOS compatibility: version 11.0 watchOS 4.2 or higher
iPhone, iPad, and iPod Touch compatibility
Android compatibility: version 5.0 or higher
Made for iPod, Made for iPhone, and Made for iPad mean the the electronic devices meet Apple
standards and were designed to communicate with iPod, iPhone, or iPad. Apple is not liable for the
operation of the devices. Use of the devices may affect the performance of the wireless network.
iPad, iPhone, iPod Classic, iPod Nano, iPod Shuffle, and iPod Touch are Apple Inc. trademarks
registered in the United States of America and many other countries.
EN
30