Atag KA8074K3C Bedienungsanleitung Seite 260

INFORMATION!
Before placing the serving tray onto the shelf and inserting the vertical bottle holder, check once
more whether the shelf and the accessory drawer are correctly installed on the rails.
Description of the appliance
An accessory drawer with wooden dividers
(14) is installed on extendible rails underneath
the serving shelf.
Inclination serving bottle shelf can be removed
from the appliance along with the accessory
drawer. Take care not to damage the door
gasket. Pull out the shelf from the appliance
as far as possible. Then, lift it at the front side
(1), pull forward (2) and lift at the back (3). To
replace the shelf with the accessory drawer
onto the rails, follow the same procedure in
the reverse order. Fully extend the telescopic
rails and align the grooves (b) on the left- and
right-hand side at the back onto the two hooks
(d). Push the shelf and place it onto the hooks
(c) on the front side of the groove (a).
Vertical bottle holder with wooden dividers (12)
is intended for storing the bottles in the vertical
position. Wooden dividers can be placed into
the grooves as desired to create separate
bottle compartments.
Serving tray (11) allows you to prepare in
advance the glasses and the decanter with
wine, and simply take them to the table directly
from the wine climate cabinet.
WARNING!
Be careful when removing a loaded tray.
25