MADRIX NEBULA Technisches Handbuch Seite 9

Connection Diagram Variations
You can connect your LEDs, MADRIX
The following pages show the different variations as connection diagrams.
These schemes are to be seen independently of the direction, position, and
mounting method. Variation A1 to Variation D refer to the data connection over
network. Variation X1 to Variation Z refer to the data connection over USB. Please
see p. 6 and p. 7 for further information.
SUPPLY POWER TO NEBULA ONLY ONCE! DO NOT CONNECT V+
MULTIPLE TIMES BY CONNECTING IT VIA PORT 1/2 AND POWER.
Legend
How To Connect Multiple LEDs
When your power supply provides power for multiple LED stripes, for example:
GROUND
V+
When your power supply only provides power for 1 LED stripe, for example:
GROUND
V+
Power
Supply
® NEBULA, and data cables in different ways.
Connection required for GROUND / DATA.
Connection possible for CLOCK if needed.
Connection required for V+.
Represents single LEDs or multiple LED stripes / LED strips
/ LED tape up to the maximum possible amount per port.
Represents as many power supplies as needed for the
amount of your LEDs. May represent a joint power supply
for several LED tapes or may represent several, seperate
power supplies for several LED tapes and ports. Please mind
the correct supply of power for your LEDs and their correct
direction as per their user manual!
Power
Supply
Power
Supply
8
EN