MADRIX NEBULA Technisches Handbuch Seite 6

IP Address And Other Device Information
You will find the following important information on the side of the device:
� Serial number ('Serial')
� Hardware revision ('Model')
� Default and pre-configured IP address ('Default IP')
(See p. 14 to reset the device to the default IP address if needed.)
Compatibility
MADRIX ® NEBULA is a standard network node for Art-Net or Streaming ACN.
You can use the device with any compatible software, console, or controller.
See chapter 'Technical Specifications' on p. 4 for detailed information.
Using The MADRIX
®
MADRIX 5 is a professional and advanced LED lighting control software. It
supports Art-Net and Streaming ACN; among many other communication
protocols. It is recommended for usage in combination with MADRIX
but only required if you would like to send or receive data over USB.
For more information about MADRIX
requirements and supported operating systems, visit the website
www.madrix.com
Please note: In order to send out data via MADRIX
®
MADRIX 5, a MADRIX
Daisy-Chain Support
®
MADRIX NEBULA features 2 separate Ethernet network ports. Either one is fully
functional for IN and OUT. They can also be used for the data connection in daisy-
chain manner without using a separate network switch or router.
We recommend to connect a maximum of 40 units after one another in a row,
when using Art-Net in Unicast Mode or Streaming ACN Multicast at a max. data
rate of 50 FPS / 20 ms without any additional devices connected to this network
line. In the MADRIX
excellent image quality (see p. 17).
5
EN
®
®
5 software license is required (sold separately)!
® 5 Software, we highly recommend to activate 'ArtSync' for
5 Software
® 5, including its minimum system
® NEBULA,
® NEBULA using