MADRIX NEBULA Technisches Handbuch Seite 16

How To Install On DIN-Rails
1
2
Unmounting (Pictured Right)
Step 1) Pull the unlocking clip.
Step 2) Lift the lower part of the device from the
rail in an angle.
Step 3) Lift the device from the rail.
Using The MADRIX
You can mainly use 3 operating modes together with the MADRIX
� Output Via Art-Net
� Output Via Streaming ACN
� Output Via USB
First, make sure to activate the correct drivers in the MADRIX
– For USB, go to 'Preferences' > 'Options...' > 'Devices USB',
– For sACN, go to 'Preferences' > 'Options...' > 'Devices Network',
– For Art-Net, go to 'Preferences' > 'Device Manager...' > 'Art-Net'.
Second, configure and activate your devices in order to send data:
– Go to 'Preferences' > 'Device Manager...' > 'DMX Devices'.
For more information, see the MADRIX
15
EN
Mounting (Pictured Left)
Step 1) Hook the device in an angle onto the upper
edge of the rail.
Step 2) Pull the unlocking clip.
Step 3) Press the lower part of the device against
the rail and let the clip snap into position.
3
® 5 Software
® 5 User Manual.
2
1
®
5 Software:
® 5 Software:
3