SCOPREGA GE 22 RC Bedienungsanleitung Seite 7

8.2 INFLATION
1. Connect the inflation hose. One end to the control panel and the other end to the
inflatable item.
2. Select INFLATE using the selector on the control panel. Set the desired pressure with the
pressure gauge
3. Press the ON button.
4. The inflator will automatically stop when the set pressure is reached, and will shut off.
5. Disconnect the inflation hose.
6. However, it is possible to stop inflation manually by pressing the OFF button.
8.3 DEFLATION
1. Connect the inflation hose. One end to the control panel and the other end to the
inflatable item.
2. Select DEFLATE using the selector on the control panel.
3. Rotate the pressure gauge to the maximum pressure
WARNING
Ensure that the button is on "DEFLATE" before starting deflating
4. Press the ON button. The inflator will start deflation.
5. Press the OFF button once the inflatable item has been emptied to stop deflation.
However, it is possible to stop deflation manually in any moment by pressing the OFF button
WARNING
The inflator does not stop automatically after deflation!
8.4 LED INDICATORS DETAILS
The ON button LED lights up green when the pumping unit is on.
The ON button LED lights off when pressing OFF.
The OFF button LED lights up white when the pumping unit is running.
The OFF button LED lights off when pressing OFF or when the pumping unit is NOT running.
The INFLATE/DEFLATE button LED is always OFF during inflation.
The INFLATE/DEFLATE button LED lights up BLUE during deflation.
8.5 ACCESSORY WARNING
The recommended accessories when using the inflator are the original SCOPREGA ones.
The use of any accessory not recommended for this inflator can be dangerous.
WARNING
When connecting the power cable to the battery , make sure to avoid short circuits and
possible fire risk
WARNING
Do not leave the inflator running unattended. Overinflating an object could result in
serious injury.
WARNING
Always check the maximum inflation pressure to avoid risks of explosion.
11