What To Do If; How To Manage: Error Codes - AEG BD782S Benutzerinformation

TROUBLESHOOTING

12.1 What to do if...

The oven does not turn on or does not heat up
Possible cause
The oven is not connected to an electrical sup‐
ply or it is connected incorrectly.
The clock is not set.
The door is not closed correctly.
The fuse is blown.
The oven Child Lock is on.
Components
Description
The lamp is burnt out.
Power cut always stops cleaning. Repeat cleaning if it's interrupted by power failure.

12.2 How to manage: Error codes

When the software error occurs, the display shows error message.
In this section, you will find the list of the problems that you can handle on your own.
Code and description
F111 - Food sensor is not correctly inserted in‐
to the socket.
128/328
Remedy
Check if the oven is correctly connected to the
electrical supply.
Set the clock, for details refer to "Clock Func‐
tions" chapter, How to set: Clock functions.
Fully close the door.
Make sure the fuse is the cause of the prob‐
lem. If the problem recurs, contact a qualified
electrician.
Refer to "Menu" chapter, Submenu for: Op‐
tions.
Remedy
Replace the lamp, for details refer to "Care and
Cleaning" chapter, How to replace: Lamp.
Remedy
Fully plug Food sensor into the socket.