Troubleshooting; Service Data - Electrolux EB6L40XCN Benutzerinformation

Turn off the oven. Wait un‐
til the oven is cold.
Top lamp
Step 1
Step 2
Step 3
Step 4

12. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
12.1 What to do if...
In any cases not included in this table
please contact with an Authorised
Service Centre.

12.2 Service data

If you cannot find a solution to the problem yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on
the front frame of the oven cavity. Do not remove the rating plate from the oven cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Before you replace the lamp:
Step 1
Disconnect the oven from
Turn the glass cover to remove
it.
Clean the glass cover.
Replace the lamp with a halogen, 230 V, 40 W, 300 °C heat-resistant
lamp.
Install the glass cover.
Step 2
the mains.
Problem
The oven does not
heat up.
The lamp does not
work.
.........................................
.........................................
.........................................
ENGLISH
Step 3
Put a cloth on the bottom
of the cavity.
Check if...
The fuse is blown.
The lamp is burnt
out.
29