Electrolux EB6L40XCN Benutzerinformation Seite 27

11.2 How to remove: Shelf
supports
Remove the shelf supports to clean the
oven.
Step 1 Turn off the oven and wait
until it is cold.
Step 2 Pull the front of the shelf
support away from the side
wall.
Step 3 Pull the rear end of the shelf
support away from the side
wall and remove it.
Step 4 Install the shelf supports in
the opposite sequence.
11.3 How to use: Catalytic
cleaning
The cavity is coated with catalytic
enamel. It absorbs fat during catalysis.
Turn off the oven and wait
until it is cold.
Step 1
Set the function and the
oven temperature:
250 °C
Duration: 1 h
11.4 How to remove and install:
Door
You can remove the door and the
internal glass panels to clean it. The
Before the catalytic cleaning
Remove all accessories
and removable shelf sup‐
ports.
Clean the oven with catalytic cleaning
Step 2
After cleaning, turn the knob
for the oven functions to the
off position.
1
2
Spots or discolouration of the catalytic
coating have no effect on the cleaning.
Clean the oven floor and
the inner door glass with
warm water, soft cloth and
mild detergent.
When the oven is cold,
clean the cavity with a
number of glass panels is different for
different models.
WARNING!
The door is heavy.
ENGLISH 27
Step 3
wet soft cloth.