Herunterladen Inhalt Inhalt Diese Seite drucken

Switching On/Off - ATIKA LSH 2600 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für LSH 2600:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3

Switching on/off

The On/Off switch is integrated in the handle.
Hold the switch pressed to start the leaf sucker. The leaf
sucker stops automatically when you release the switch.
Do not use any device where the switch can not be
switched on and off. Damaged switches must be
repaired or replaced immediately by the customer
service.
W
o
r
k
i
n
g
w
i
W
o
r
k
i
n
g
w
i
Before starting any work read and understand
> the safety notes,
> following additional instructions on how to work
with this machine.
The machine may only be operated by persons over the
age of 16 years, and who have read and understood
these operating instructions.
Wear your safety gear (goggles/vizor, gloves, long
trouseres, non-slip shoes) for protection from possible
injuries.
Make sure to have a safe and tidied up work area.
Remove from the working area objects which might be
thrown off.
Before starting your work make sure that:
− no other persons or animals stay within the working
area,
− you can always step back without any barriers,
− you have always a secure standing position.
− handles and mountings are dry and clean.
Never aim the suction/blowing pipe at people or animals.
Never blow objects in the direction of people of animals.
Spectators must observe safety clearance of min. 5 m.
Switch-off the device if you cross gravel- and ballast
chipping walks.
Beware of swirling and flying objects. Be particularly
aware of recoiling effects from brickwork or house walls
(e.g. stones).
Switch off the machine before crossing gravel or grit
paths.
Do not fill anything by hand into the suction hole.
Do not operate the machine with wet hands or during
damp weather.
13
t
h
t
h
e
g
a
r
d
e
n
v
a
c
t
h
t
h
e
g
a
r
d
e
n
v
a
c
Never put objects manually into the suction opening.
Always ensure that the connection lead runs back away
from the machine. Otherwise there is a risk of stumbling,
slipping or falling.
Never use the machine
− without the bag,
− without closing the zip fastener of the bag
If persons who have blood circulation problems are too
often exposed to vibrations damages to the nervous system
or to blood vessels may occur.
You can reduce vibrations
-
by thick and warm working gloves,
- shorter working time (have longer breaks).
See a doctor if your fingers swell, you don't feel well or your
fingers become numb.
Before using the machine, ensure that the bag has been
fitted, is not damaged or worn and the zip fastener has been
closed.
Instructions for using as vac/shredder
1. Move
the
changeover
switch to the vac/ shredding
setting.
2. Hold the machine firmly at
the handle and place the
belt over your shoulder.
Adjust the belt so that the
machine can be carried
comfortably and safely.
3. Switch the machine on.
4. Move the machine slowly and evenly over the material.
Do not press it into the leaves.
5. The suction power decreases when the bag is full. Switch
the machine off and disconnect from the mains. Open the
zip fastener and empty the bag.
6. After finishing work, move the changeover switch to the
blowing setting to remove any remains from the
suction/blowing pipe.
Take up leaves in good time! – It is advisable to take
up fallen leaves when the weather is dry and as soon as they
have fallen. Wet leaves are a problem, together with leaves
that have already begun to rot or are on big piles.
Instructions for use as blower
1. Move
the
changeover
switch
to
the
blowing
setting.
2. Hold the machine firmly at
the handle and place the
belt over your shoulder.
Adjust the belt so that the
machine can be carried
comfortably and safely.
3. Switch the machine on.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis