Herunterladen Inhalt Inhalt Diese Seite drucken

Kenwood Multipro Sense FPM810 Serie Bedienungsanleitung Seite 7

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 39
ALWAYS commence blending at a low speed and gradually increase
the speed. NEVER blend hot liquids by using the Pulse setting.
Liquids which tend to foam such as milk, should be limited to a
maximum capacity of 1000mls/4 cups.
Take care when handling the blender as the goblet and its contents will
be very hot.
Take particular care when removing the lid. The lid is designed to be a
tight fit to prevent leakage. If necessary protect your hands with a cloth
or oven gloves when handling.
Ensure the goblet is securely attached to the base and when removing
from the appliance, guide the base and ensure it is removed together
with the goblet.
Ensure that the lid and filler cap are securely in place before every
blending operation.
Always ensure that the vents in the filler cap are clear before every
blending operation
When fitting the lid to the goblet always ensure that the lid and goblet
rim are clean and dry to ensure a good seal and prevent spillage.
slicing/grating discs
Never remove the lid until the cutting disc has completely stopped.
Handle the cutting discs with care - they are extremely sharp.
Do not overfill the bowl – do not exceed the maximum capacity level
marked on the bowl.
mini bowl and knife
Never remove the lid until the knife blade has completely stopped.
The knife blade is very sharp - always handle with care.
Do not process spices – they may damage the plastic.
Do not process hard food such as coffee beans, ice cubes or chocolate –
they may damage the blade.
before plugging in
Make sure your electricity supply is the same as the one
shown on the underside of your appliance.
WARNING: THIS APPLIANCE MUST BE EARTHED.
This appliance conforms to EC Regulation 1935/2004 on
materials and articles intended to come into contact with
food.
before using for the first time
1 Remove the plastic blade covers from the knife blade.
Take care the blades are very sharp. These covers
should be discarded as they are to protect the blade during
manufacture and transit only.
2 Wash the parts see 'care & cleaning'
.
key
processor
5
power unit
bowl with drive shaft
detachable drive shaft
lid
feed tube
pushers
safety interlocks
cord storage (at back)
auto button
speed/pulse control
power on light

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis