Content Of The Packaging - Labelmate COUNT-100 Bedienungsanleitung

About your Counter
Your Label Counter is a quick and easy solution for counting the labels on a roll. C-100; C-100-u and
C-200 units can be placed at the output of any label printer.
P/N MODEL
LMC005 COUNT-100
LMC006 COUNT-200
LMC007 COUNT-100-U

CONTENT OF THE PACKAGING

Remove all parts from the shipping container and verify contents.
• User Manual (this document)
• Counter Unit
• Power Supply Module
• Control Cable
Retain the shipping Container and Packaging for storage and transport.
GENERAL
• Power Supply: Input 100-240 VAC - 50-60 Hz Output: 1.5VDC
• Weight: COUNT-100 : 7.42kg
• Max. Label Roll Width: COUNT-100: 170mm
• Limited Warranty of 5 Years, 1 Year on the Power Supply
IMPORTANT INFORMATION
• This product is a label counter. It is only to count rolls of labels in an indoor, dry environment.
• The machine has to be unpluggled before any manipulation
• The machine is to be used on a flat surface, if the surface is not flat, it is to be fixed using the holes in the base plate
• Do not leave the power cable of the counter in a passageway.
• The ambient light of the working area needs to be sufficient to avoid any risk.
• Connection of the machine to the power source must respect local and European legislations.
COUNT-LABEL COUNTERS
PC-1 Preset Counter with adjustable counter sensitivity. Counts single
labels or pre-set batch quantity. Can Stop rewinder (CAT-3) when job is
finished. W x D x H: 355 x 280 x 250 mm
PC-1 Preset Counter with adjustable counter sensitivity. Counts single
labels or pre-set batch quantity. Can Stop rewinder (CAT-3) when job is
finished. W x D x H: 435 x 280 x 250 mm
COUNT-100 with Ultrasonic Sensor mounted on adjustable bracket. For
counting transparent, black and special shaped labels
COUNT-200: 8.13kg
COUNT-200: 255mm
DESCRIPTION
MAX LABEL
WIDTH (mm)
170
255
170
Labelmate.com