Stihl KGA 770 Gebrauchsanleitung Seite 41

During Charging Process
The light emitting diodes glow
continuously or flash to indicate the
progress of charge.
During charging the capacity that is
currently being charged is indicated by a
green flashing light emitting diode.
0 - 20 %
20 - 40 %
40 - 60 %
60 - 80 %
80 - 100 %
When the charging process is
completed, the light emitting diodes on
the battery go off automatically.
If the light emitting diodes on the battery
flash or glow red – see "If the red light
emitting diodes glow continuously /
flash".
KGA 770
During Operation
The green light emitting diodes glow
continuously or flash to indicate the state
of charge.
80 - 100 %
60 - 80 %
40 - 60 %
20 - 40 %
0 - 20 %
If the light emitting diodes on the battery
flash or glow red – see "If the red light
emitting diodes glow continuously /
flash".
If the red light emitting diodes glow
continuously / flash
1 light emitting Battery is too hot
2)
diode glows con- /cold
tinuously red:
4 light emitting Fault in battery
diodes flash red:
3 light emitting Power tool is too
diodes glow con- hot – allow it to cool
tinuously red: down.
3 light emitting Fault in power tool
4)
diodes flash red:
1)
During charging process: Charging
process starts automatically after
the battery has cooled down /
warmed up.
English
1)
1)
3)
39