Switching On; Working - Stihl KGA 770 Gebrauchsanleitung

Switching On

The battery is given a charge of about
30% before leaving the factory.
Recommendation: Fully charge the
battery before using your power tool for
the first time.
Fitting the Battery
1
Insert the battery (1) in the power
N
tool – the battery slides into the
compartment – press it down
carefully until it snaps into position –
the battery must be flush with the
top of the housing.
Switch on the saw.
Set the on/off switch to I.
N
KGA 770
Side brooms and roller brush begin to
rotate.

Working

Height Adjustment of Side Brooms
The height adjusting knob enables the
side brooms to be set to suit the surface
being cleaned.
Turn the knob to the required
N
setting:
Setting Application
1 - 2 for flat surfaces
3 - 4 damp leaves, sand, uneven
surfaces, e.g. exposed
aggregate concrete
5 - 8 Readjustment to compen-
sate for bristle wear
Side broom bristles must just rest on the
ground. Setting the contact pressure too
high does not produce better cleaning
results, it increases wear and reduces
the battery running time.
English
41