After Finishing Work
Removing / Emptying Hopper
Fold the push handle forwards.
N
Pull hopper handle upwards.
N
KGA 770
Remove the hopper and empty it.
N
Fitting the Hopper
Place the hopper in position on the
N
machine – the recesses in the
hopper engage the retainers on the
machine.
Lock the hopper handle.
N
Storing the Machine
Remove the battery.
N
Thoroughly clean the machine.
N
Store the machine in a dry and
N
secure location out of the reach of
children and other unauthorized
persons.
Position the machine so that the bristles
of the side brooms are not bent or
twisted. Bent or twisted bristles may
otherwise become permanently
deformed. Twisted bristles can be
straightened by heating them with a hair
dryer – see "Inspection and
Maintenance by User".
Storing the Machine
The machine can be stood on end for
space-saving storage.
Secure power tool to prevent it or the
push handle falling over.
English
43