Circuit Diagram - swim-tec CL2 Deluxe WiFi 2,4 l/h Bedienungsanleitung

8

Circuit diagram

F1
F2
X2 [4, 5, 6]
X3 [7, 8, 9]
X4 [10, 11, 12]
X5 [13, 14, 15]
X6 [16, 17]
X7 [18, 19]
X8 [20, 21]
X9 [22, 23, 24]
X10 [25, 26]
X11 [27, 28]
X13
X14
Fuse pump pH 3.15 A slow-blowing
Fuse pump disinfection 3.15 A slow-blowing
Mains supply for control and dosing pumps
Dosing pump pH
Dosing pump disinfection
Alarm contact potential-free
Flow sensor (flow monitoring)
Level 1 (pH)
Level 2 (disinfection)
Flow meter
22 = Supply +5 V = brown
23 = Signal = green
24 = Earth = white
Temperature sensor (NTC 6.8k at 25°C)
Electrode CLE (4-20 mA) – not relevant for pH/Rx
27 = +
28 = -
Plug for optional interface module
(not suitable for old modules)
LED illumination of the flow cell (only connect supplied LED!)
B = Cathode blue = white
A = Anode (power source, approximately 80 mA, max. ca. 9 V) = brown
R = Cathode red = green
45