Set Sleep Timer; Settings - auna IR-130 Bedienungsanleitung

EN
30

SET SLEEP TIMER

Press SLEEP several times to activate the sleep timer and set the sleep
time (15 to 180 minutes). When the sleep timer is activated, the symbol
appears on the display.

SETTINGS

Network
Add/Remove AP
• Add AP: Add Access Point
• Remove AP: Remove Access Point
AP: [ ]: Select this option if you have several routers and want to switch
between them
Signal: Displays the signal strength (of the signal received by the radio
from the router). Change the location of the unit if the signal is weaker than
-70 dBm.
IP: Set the IP of the device dynamically or statically, depending on your
network configuration. Standard: DYNAMIC.
DNS: Set the DNS of the device dynamically or statically, depending on
your network configuration. Standard: DYNAMIC.
WiFi Channels: Set the WiFi channels here (default: Europe & UK).
Date and time: Set the time and date manually here or select USE
NETWORK TIME so that the unit automatically obtains the date and time
from the network.
Language: German / English / Chinese
Local radio: Standard: Europe/UK. Change to have direct access to the local
channels via the Skytune path.
Playback setup: Select a playback mode for UPnP streaming (Repeat,
Repeat All, Shuffle).