Set Time; Radio Functions - auna KCD-20 Bedienungsanleitung

EN
28

SET TIME

• Switch the unit to standby mode with
• Press and hold MEM/CLK-ADJ until the display shows [24HR]. You can
now use the arrow keys
in 12- or 24-hour format. Confirm your selection with MEM/CLK-ADJ.
• Now set the hour with the arrow keys and confirm with MEM/CLK-ADJ.
• Repeat the procedure for setting the minutes.
Note: The time setting is automatically cancelled if no entry is made for
a period of approx. 5 seconds. The set time is deleted when the unit is
disconnected from the power supply AND there are no batteries in the
battery compartment or they are dead.

RADIO FUNCTIONS

• Switch on the unit and press FUNCTION several times to select the
radio mode.
• Press and hold SCAN button, FM radio search starts and stores all
received stations automatically.
• Press the / buttons for selecting desired stations (20 available).
Note: The memory setting is automatically cancelled if no entry is made
for a period of approx. 5 seconds. The saved stations will be deleted
when the unit is disconnected from the power supply AND there are
no batteries in the battery compartment or they are dead. The memory
locations are overwritten when they are reallocated without further
enquiry.
.
/ to choose between the time display