Commissioning And Settings - auna IR-130 Bedienungsanleitung

COMMISSIONING AND SETTINGS

Follow these steps to connect the radio to your WiFi network.
1. Switch on the radio: Plug the power cable of the mains unit into the DC
power connector on the back of the unit and then switch on the unit.
2. The display switches on and the following is displayed in succession:
3. Use the wheel or arrow keys to select YES to set the network:
4. Select ADD/REMOVE AP and in the submenu select ADD AP (AP =
Access Point = your WLAN router)
The environment is scanned for available APs and finally a list is
displayed. Select your WiFi router from this and press SELECT to
connect.
5.
EN
25