auna iTuner 320 BT Bedienungsanleitung Seite 52

EN
52
Manual settings
NetRemote PIN Setup
Network profile
Clear network settings
Keep network
connected
3. Press the BACK button on the unit or remote control to cancel the setting
and return back to the previous menu.
Time/Date
The Time/Date can be automatically set once it has been connected to the
Internet, DAB or FM radio station with time/date information. You may also
adjust the Time/Date manually.
Press CLOCK button on remote control can access Set Time/Date menu to
adjust Time/Date.
Alternatively: During System settings mode, press
to select Time/Date and press the SELECT button to confirm. Press
buttons to select Set Time/Date and press the SELECT button
to confirm.
1. The date digits will flash on the display.
/
2. Press the   buttons to adjust the day and then press the SELECT
button to confirm.
3. Repeat above Step (2) to set the Month/Year/Hour/Minute.
4. The date and time settings are now complete.
For the other settings under Time/Date, press
from the following options and then press the SELECT button to confirm.
Auto update
Set format
Set timezone
Daylight savings
Select wireless network with DHCP enable/
disable.
To define a PIN number to be entered before
being able to connect to the unit remotely
over a network.
View the connected network.
To delete the connected network memory in
Network profile.
Allows you to define whether the device
remains connected to its network in Standby
mode and when not in Network radio mode.
DAB / FM / Network / No update.
12 / 24 hour format.
Select a time zone. (Only available when
Auto update from Network is on.)
Select daylight savings. (Only available
when Auto update from Network is on.)
buttons
buttons to select