Omron HEM-907 Gebrauchsanweisung Seite 7

(4) Setting mode change function
You can set the number of times to measure, the waiting time until the start of measurement, and the interval between
measurements.
Items to set
F1 Number of measurements
F2 Waiting time until the start of measurement
F3 Measurement interval time
Procedure to change the set values
1) When the power is off, press the ON/OFF Button for more than three
seconds while holding the START Button and change the mode to the
Setting Change Mode.
2) Press the START Button to select the item from F1 to F3.
3) Press the DEFLATION Button to change the set values.
List of Functions for each Mode
Measurement
Mode
Function
Pressure setting
function
Non-display
function
Manual deflation
control function
Setting mode
change function
Names and Functions of the Parts
Single measure- Average
ment (SINGLE) (AVG.)
Set value
2 times, 3 times
0 sec, 3 min, 5 min, 10 min.
5 sec, 30 sec, 1 min, 2 min, 3 min.
ON/OFF
START
HIDE
P-SET MODE
140 180 SINGLE
AVG. MANU.
220 CHECK
100
260
AUTO 280
Auscultation Check
(MANU.) (CHECK)
STOP
7