Omron HEM-907 Gebrauchsanweisung Seite 16

How to Measure Blood Pressure
1. Wrap the arm cuff over the
patient's arm.
3. Set the MODE Selector to
"SINGLE".
5. Push the START Button to start
the measurement.
•
If the inflation is determined
insufficient, the unit may start
inflation again automatically.
•
If you want to stop measure-
ment, push the STOP Button.
The unit deflates fast.
7. Push the ON/OFF (power)
Button to turn off the power.
16
2. Push the ON/OFF (power)
Button to turn on the power.
4. Set the P-SET (pressure set-
ting) Volume to "AUTO" or the
ON/OFF
target inflation value.
START
HIDE •
When setting the P-SET to
P-SET MODE
"AUTO", turn the Volume
SINGLE
140 180
MANU.
AVG.
220 CHECK
100
STOP
counterclockwise as far as it
260
AUTO 280
goes until you can hear the
click sound.
•
When the systolic pressure is
expected to exceed 220 mmHg,
proper inflation may not be pos-
sible in "AUTO" setting.
Set the target inflation value to
30 to 40 mmHg higher than the
expected systolic pressure.
6. Measured results are dis-
played.
ON/OFF
START
HIDE
P-SET MODE
SINGLE
140 180
AVG. MANU.
220 CHECK
100
STOP
260
AUTO 280
ON/OFF
START
HIDE
P-SET MODE
SINGLE
140 180
AVG. MANU.
100 220 CHECK
STOP
260
AUTO 280
(in SINGLE Mode)
ON/OFF
START
HIDE
P-SET MODE
SINGLE
140 180
AVG. MANU.
220 CHECK
100
STOP
260
AUTO 280
ON/OFF
START
HIDE
P-SET MODE
SINGLE
140 180
AVG. MANU.
220 CHECK
100
STOP
260
AUTO 280
SYS
mmHg
DIA
mmHg
PULSE
BPM
HIDE