Candy CMBI970LX DE Bedienungsanleitung Seite 6

3. The ceiling must can bear at least 120kgs weight, and the thickness of the ceiling
must be ≧30mm, drill 1*170mm round hole in the ceiling.
4. According to the hanging board, drill 12 holes in the ceiling, see pic 2. 12 pcs of
ST6*40mm big flat screws will be used to fix the hanging board on the ceiling, and
then 8 pcs of M4*10 screws and M4 nut with gasket will be used to connect the
angle iron into the hanging board, see pic 3, calculated the length of the angle iron,
see pic 1,and use 16 pcs of M4*10mm big flat screws and M4 nut with gasket will be
used to connect the angle iron and another angle iron ( the overlap length of angle
iron can not less 100mm) see pic 3.
5. 4 pcs ST4*8mm of big flat screws will be used to connect the inside chimney into
the hanging board, then put on the outside chimney, a hook will be used to put up
the outside chimney in order to the next installation, see pic 4. Then Install the
converter on the outlet.see pic 5
6