Husqvarna Soff-Cut 4000 Bedienungsanweisung Seite 62

3. Attach the new small air filter, the new large air filter
and the air filter cover.
To examine the drive belt
CAUTION:
drive belt is damaged. You must replace the
drive belt if it is damaged.
1. Loosen, but do not remove, the screws on the rear,
on the side and on the front of the drive belt cover.
2. Remove the drive belt cover.
62
Do not use the product if the
3. Examine the 2 drive belts for damage and wear.
4. If the drive belt is damaged, replace the drive belt.
To replace the drive belt on page 62 .
Refer to
5. If the drive belt is not damaged, attach the drive belt
cover.
To replace the drive belt
1. Remove the drive belt cover, refer to
drive belt on page 62 .
2. Lift the belt tension to loosen the tension of the drive
belt and remove the drive belt.
To examine the
794 - 001 - 19.04.2022