Husqvarna Soff-Cut 4000 Bedienungsanweisung Seite 69

• For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
• Always use approved containers for transportation of
fuel.
To lift the product
WARNING:
equipment has the correct dimension. The
type plate on the product shows the product
weight.
WARNING:
product. Make sure that the lift point is
correctly installed and not damaged.
WARNING:
chains or other lifting equipment with rough
edges that can cause damage to the lift
point.
• Attach the lifting equipment to the lift point on the
safety frame.
Storage
• Remove the cutting blade before storage of the
product.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Keep the cutting blades in a safe area to prevent
damage.
• Keep the cutting blades in a dry and frost-free area.
• Examine new cutting blades for storage damage.
• For storage of the product and fuel, make sure that
there are no leaks or fumes. Sparks or open flames,
for example from electrical devices or boilers, can
start a fire.
• Always use approved containers for storage of fuel.
• Keep the product in a fully lowered position and
make sure that it cannot move.
For long-term storage, also do these steps:
794 - 001 - 19.04.2022
Make sure that the lifting
Do not lift a damaged
Do not use metal hooks,
• Clean the product and do a complete servicing.
• Empty the fuel tank.
• Keep the product in a dry and frost-free area.
• Put a protective cover on the product. This is
especially important for storage outdoors.
• Replace the engine oil after a long-term storage.
Disposal
• Obey the local recycling requirements and applicable
regulations.
• Discard all chemicals, such as engine oil or fuel, at a
service center or at an applicable disposal location.
• When the product is no longer in use, send it to
a Husqvarna dealer or discard it at a recycling
location.
69