Bosch GST 18 V-LI S Professional Originalbetriebsanleitung Seite 15

All manuals and user guides at all-guides.com
OBJ_BUCH-2148-002.book Page 15 Friday, January 16, 2015 11:21 AM
Technical Data
Cordless Jigsaw GST 18 V-LI S GST 18 V-LI B
Article number 3 601 EA5 1.. 3 601 EA6 1..
Rated voltage V=
Stroke rate at
-1
no load n min 550–2700
0
Stroke mm
Cutting capacity,
max.
– in wood mm
– in aluminium mm
– in non-alloy steel mm
Bevel cuts
(left/right), max. °
Weight according to
EPTA-Procedure
01/2003 kg
Permitted ambient
temperature
– during charging °C
2
– during operation
and during storage °C –20...+50
Recommended
batteries GBA 18V..
Recommended
chargers
1 depending on the battery pack being used
2 limited performance at temperatures <0 °C
Noise/Vibration Information
Sound emission values determined
according to EN 60745-2-11.
Typically the A-weighted noise levels
of the product are
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector
h
sum) and uncertainty K determined
according to EN 60745:
Cutting board:
a
h
K
Cutting sheet metal:
a
h
K
Bosch Power Tools
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
18 18
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
0–2700
poorly maintained, the vibration emission may differ. This
23 23
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
120 120 take into account the times when the tool is switched off or
20 20
when it is running but not actually doing the job. This may signif-
8 8
icantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
– 45
accessories, keep the hands warm, organisation of work pat-
terns.
1 1
2.2/2.4 2.2/2.4
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
0...+45 0...+45
vant provisions of the directives 2009/125/EC (Regulation
1194/2012), 2011/65/EU, 2004/108/EC, 2006/42/EC
–20...+50
including their amendments and complies with the following
standards: EN 60745-1, EN 60745-2-11.
GBA 18V..
Technical file (2006/42/EC) at:
AL 18.. AL 18..
Robert Bosch GmbH, PT/ETM9,
GAL 3680 GAL 3680
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 08.01.2015
Assembly
 Before any work on the machine itself (e. g. mainte-
nance, tool change, etc.) as well as during transport
dB(A) 79 81
and storage, remove the battery from the power tool.
dB(A) 90 92
There is danger of injury when unintentionally actuating
dB 3 3
the On/Off switch.
Battery Charging
 Use only the battery chargers listed on the accessories
page. Only these battery chargers are matched to the lith-
ium-ion battery of your power tool.
2
m/s 7.5 6
Note: The battery supplied is partially charged. To ensure full
2
m/s 1.5 1.5
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
2
m/s 8 8.5
The lithium-ion battery can be charged at any time without re-
2
m/s 1.5 1.5
ducing its service life. Interrupting the charging procedure
does not damage the battery.
English | 15
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
1 609 92A 15H | (16.1.15)