Klarstein KRAFTWERK ECO SMART 11 Bedienungsanleitung Seite 38

EN
38
Setting the temperature
1. Press the [+] and [-] buttons to set the desired temperature.
2. The display shows the temperature you have set when you press the [+] and
[-] button. Otherwise, it always shows the ambient temperature.
3. The preset temperature in cooling mode for this unit is 24 °C.
Setting fan speed
4. Press the fan speed button to set the desired fan speed: high, medium or low.
The indicators for high, medium or low fan speed light up simultaneously.
5. When the unit is in automatic mode, it automatically selects the fan speed
according to the ambient temperature (the corresponding indicators light up).
The fan speed key and the [+] and [-] keys are deactivated.
Setting the timer
1. Press the timer button to set the desired operating time
(1 to 24 hours), the timer indicator lights up. When the set time is reached, the
unit switches off automatically. When you press the timer button, the display
shows the hour(s) you have set. If the timer button is not pressed, the unit
runs continuously.
2. If you press the timer button without switching on the other functions, you
can preset the time that the appliance is to be in operation. For example, if
you set the timer to "2", the appliance will automatically go into operation
after 2 hours.
Sleep mode
1. If you press the sleep mode button in cooling mode, the set temperature is
increased by 1 °C in the first hour, by another 1 °C in the second hour and
then kept at this temperature.
2. In sleep mode, the fan runs at a low level. If you press the sleep mode button
again, the temperature setting and the fan speed are reset to the originally set
values.
3. The unit switches off automatically when the unit has been in sleep mode for
12 hours.
Note: Note that sleep mode is not available when the unit is running in
automatic mode, fan mode or dehumidification mode. When the unit is
operated in sleep mode, the fan shuts down to the lowest level.