Klarstein KRAFTWERK ECO SMART 11 Bedienungsanleitung Seite 43

Permanent water drainage
If you want to use the machine without emptying the water tank, proceed as
follows:
1. Remove the drain plug and rubber plug and store it well for later use.
2. Connect the supplied drain hose to the drain opening as shown and guide the
other end into a drain.
3. The drain hose can be extended using an extension hose with a suitable
connector.
Rubber plug
Notes:
1. The drain must be at or below the level of the water outlet of the appliance.
2. The "water tank full" indicator does not flash when water is continuously
draining.
3. If you want to extend the drain hose, you can connect it to another hose
(outer diameter OD: 18 mm).
Drain plug
Original supplied hose
Extension hose (OD: 18 mm)
Supplied drain hose
EN
43