Makita UR002G Betriebsanleitung Seite 13

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Handle type
No load speed
(at each rotation speed level)
Overall length
(without cutting tool)
Nylon cord diameter
Applicable cutting tool and
cutting diameter
Rated voltage
Net weight
Protection degree
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended battery adapter
Battery adapter
• The battery adapter(s) listed above may not be available depending on your region of residence.
• Before using the battery adapter, read instruction and cautionary markings on the battery adapter.
Cutter blade /
Nylon cutting head /
Plastic blade
3-tooth blade
(P/N: 195298-3)
4-tooth blade
(P/N: 195150-5)
8-tooth blade
(P/N: B-14130)
Nylon cutting head
(P/N: 198893-8)
Plastic blade
(P/N: 198383-1)
UR002G
Bike handle
4.6 - 5.0 kg
BL4020 / BL4025 / BL4040
13 ENGLISH
UR003G
Loop handle
-1
3: 0 - 6,500 min
-1
2: 0 - 5,300 min
-1
1: 0 - 3,500 min
1,760 mm
2.0 - 2.4 mm
230 mm
230 mm
230 mm
350 mm
255 mm
D.C. 36 V - 40 V max
4.1 - 4.4 kg
IPX4
DC40RA
PDC1200 / PDC01