Safety; Intended Use; Security Instructions - Zipper Maschinen ZI-SKN330W Betriebsanleitung

10

SAFETY

10.1

Intended Use

The machine must only be used for its intended purpose! Any other use is deemed to be a case of misuse.
To use the machine properly you must also observe and follow all safety regulations, the assembly
instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be informed
about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for:
Cutting kerb stones and natural stones.
Any manipulation of the machine or its parts is a misuse, in this case
and its sales partners cannot be made liable for ANY direct or indirect damage.
Prohibited use:
 The operation of the machine outside the stated technical limits described in this manual
is forbidden.
 Operation of the machine function without any protection devices is forbidden.
 The use of the machine not according with the required dimensions is forbidden.
 The use of the machine not being suitable for the use of the machine and not being
certified is forbidden.
 Any manipulation of the machine and parts is forbidden.
 The use of the machine for any purposes other than described in this user-manual is
forbidden.
 The unattended operation on the machine during the working process is forbidden!
 It is not allowed to leave the immediate work area during the work is being
performed.
10.2

Security instructions

Missing or non-readable security stickers have to be replaced immediately!
To avoid malfunction, machine defects and injuries, read the following security
instructions!
The locally applicable laws and regulations may specify the minimum age of the operator and limit the
use of this machine!
 Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid
slippery floor!
 Use the machine only in good enough light to allow a safe operation can be guaranteed!
 Always stay focused when working. Reduce distortion sources in your working
environment. The operation of the machine when being tired, as well as under the
influence of alcohol, drugs or concentration influencing medicaments is forbidden.
 Make sure you stand squarely and keep balance at all times
 Use personal safety equipment: safety goggles, safety shoes S1, safety gloves (EN 388,
class 3111) working with or on the machine!
 Make sure you can move your hands freely on the machine, so you can work safely.
 Secure the handle when not using the device or while transporting it
 Make sure your hands are not placed under the cutting blades.
 Stone particles or the like can be thrown out - risk of injury.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-SKN330W
SAFETY
ZIPPER-MASCHINEN
.
13