EGO BCX3800 Übersetzung Der Originalanleitung Seite 7

SPECIFICATIONS
Cutting unit Trimmer head
Voltage
56V
4000-5800
No-load Speed
/min
Recommended
Operating Temperature:
Recommended
Storage Temperature:
Cutting Line Type 3.0mm
Cutting blade /
Cutting Width 38cm
Weight 6.8kg
Measured sound 94.2dB(A)
power level L K=1.8dB(A)
WA
Sound pressure level 74.15dB(A)
at operator's ear L K=2.5dB(A)
PA
Guaranteed sound
power level L 96dB(A)
WA
(according to 2000/14/EC)
Left 1.9m/s
Handle K=1.5m/s
Vibration a
h
Right 1.5m/s
Handle K=1.5m/s
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should wear
gloves and ear protectors in the actual conditions of use.
PACKING LIST (Fig.A1)
DESCRIPTION
KNOW YOUR BRUSH CUTTER (Fig. A1)
1. Trimmer Line
2. Guard Assembly
3. Shaft
56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUSH CUTTER — BCX3800
3-teeth metal
blade
56V
4000-5800
/min
0°C-40°C
-20°C-70°C
/
ABB1203
30cm
6.46kg
96.3dB(A)
K=2.1dB(A)
83.4dB(A)
K=4.1dB(A)
98dB(A)
1.9m/s
2 2
K=1.5m/s
2 2
1.3m/s
2 2
K=1.5m/s
2 2
4. Trigger
5. Lock-off Button
6. Wing Bolt
7. Hook
8. Socket
9. Guard Plate
10. Bike Handle
11. Sealing Screw
12. Shaft-locking Hole
13. Line-cutting Blade
14. Guard Accessory
15. 3-teeth Blade
16. Blade Sheath
17. Outer Flange
18. Nut
19. Multi-function Wrench
20. Hex Wrench
21*. Hip-pad (Sold separately)
WARNING:
Never operate the tool without the guard
firmly in place. The guard must always be on the tool to
protect the user.
WARNING:
When the tool is equipped with a
trimmer head, the guard accessory with line–cutting blade
should be mounted onto the guard. Failure to comply will
result in overly long cutting line and overload the motor.
Never use the trimmer head without guard accessory.
ASSEMBLY
WARNING:
If any parts are damaged or missing, do
not operate the brush cutter until the parts are replaced.
Use of the brush cutter with damaged or missing parts
could result in serious personal injury.
WARNING:
Do not attempt to modify the brush
cutter or create accessories not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possibly serious personal injury.
WARNING:
Always wear heavy gloves when
installing or removing the guard and doing any
maintenance on the 3-teeth blade/line-cutting blade.
Be careful of the line-cutting blade on the guard
accessory / 3-teeth blade for protecting your hands from
being injured by both the blades.
EN
7