Reset; Ethernet Status Indicators - NetModule NB3711 Software Benutzerhandbuch

NB3711
NRSW-Benutzerhandbuch - Version 4.6.0.100
Ethernet LEDs
The following table describes the Ethernet status indicators.
Bez. Farbe
Ethernet
1-5

3.4.3. Reset

The reset button has two functions:
1. Reboot the system:
Press at least 3 seconds to trigger a system reboot.
The reboot is indicated with the red blinking STAT LED.
2. Factory reset:
Press at least 10 seconds to trigger a factory reset.
The start of the factory reset is confirmed by all LEDs lighting up for a second.
Status Funktion
on Link on (10 Mbit/s or 100 Mbit/s)
blinking Activity
off no Link
Tabelle 3.4.: Ethernet Status Indicators
22